The Chiller is compact and easily connectet to an existing pipeline system. They are equipped with a water tank and centrifugal pump. In outlet temperatures below + 10 ° C is the use of antifreeze (glycol, 34%) required.
Compact water chiller AquaZero 12,0 kW:
– Cooling water temperature range from: -5°C* to +15°C
– Ambient temperature range from: +5°C to +42°C
– Cooling capacity: 12,00 kW
– Refrigerant: R407C
– According to F-Gas Regulation (EU) No. 517/2014 up to 13.5 kW NO leak test required**
– Power supply: 400 Volt, 3-Phase, 50 Hertz
– Connection cable: 4 meter with plug
– Waterin-/-outlet-Connection: 3/4 Zoll external thread
– Water tank volume: 160 litre
– Incl. Bypassvalve, Pressure gauge, Strainer, floating switch for water deficiency
– Dimensions: L 880 x H 1.600 x D 750 mm
– Weight: 250 kg without water and additional options
– Chassis: steel plate, powder-coated
BENEFITS:
– Connection cable 4 meters with plug
– Sieve installed in the water inlet
– Bypass incl. Pressure gauge installed in the device
– Float switch installed for low water alarm
– Digital display with fault and operational signals and external remote release via Nano Terminal
– MicroGroove condenser (micro-channel filter, as sensitive to dirt)
– Evaporator: copper plain tube coil
– A series for min. outlet temperature of -5 ° C.
– Many possible configurable and already assembled e.g. overflow protection
– Made in Germany!
Additional Options:
– Castor set: 2x fixed castors galvanized, 2x swivel castors galvanized, one of them with parking brake
– Overflow protection: positively controlled solenoid valve (0bar) in the return, non-return valve in the flow
– Heating temperature control: heating cartridge with thermostat and safety temperature limiter, 3-way control valve to increase preheating
– Outdoor installation: Compressor with oil sump heating, winter start device for cooling circuit, roof plate closed, operating area outside air temperature extended: -20°C to + 43°C.
– Automatic filling: solenoid valve and float switch max. 6 bar, max. 25 l / min, max. + 60°C
– AquaZero Control EASY l External: Remote control unit with operating module, collective alert lamp, ON-OFF-AUTO switch, wall bracket and 10 meter cable
– Pump pressure increase: Pump pressure increases by 1 to 1.5 bar
Cooling Capacity:
– 15°C Coolant – supply flow temperature
– 20°C Coolant – return flow temperature
– 32°C Outside air temperature of the cooling unit
*An antifrogen should be used if the flow temperature is below + 10 ° C.
**according to F-Gas Ordinance No. 517/2014 January 1st, 2015